FEATURES

• 12 inputs/6 outputs
• 6 balanced mic/line inputs
• 4 unbalanced, mono-summed RCA input pairs
• Mic gain per channel
• AutoWarmth per output zone

DESCRIPTION

With 12 inputs and 6 outputs the dbx ZonePRO® 1260m provides flexible signal routing, powerful DSP processing and multiple control interfaces for commercial audio applications.

Designed to offer superior sonic performance and flexibility, the 1260m delivers the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer six Euroblock connectors for balanced microphone or line signals (switchable), plus four stereo RCA connectors and one 2-channel S/PDIF connector for interfacing with consumer equipment; there is also a simple analog input bus that allows inputs to be sent from one ZonePRO unit to the next for unit and job scalability.

The 1260m provides every necessary processing tool, from the input processing like gain control and EQ available on all inputs to dbx's trademark, sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression, and Feedback Suppression. The heart of the ZonePRO products is the Routing module that allow for not only Primary Source Selection but also Source Ducking for Paging and Priority Override.

The outputs also offer a breadth of processing options that are perfect for commercial applications. For example, dbx’s patent-pending AutoWarmth® function that was co-developed with JBL was included to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization.

As an improvement from the dbx 1261m, the 1260m can be controlled not only by ZonePRO Designer (software via RS-232, Ethernet) and wall panel control, but also by it's onboard LCD screen and menu buttons. With the ZonePRO® every tool is at your disposal to maximize the response of your system. Get yours today.

SPECIFICATION

• Front Panel LED Indicators:
  • Per Output: 6 independent six-segment light pipe output meters that range from -30 to +20 dBu, threshold meters
  • Other: LCD Display provides information about Source Selection, Page Steering, Zone Volume and Mute
• Analog Inputs: 12 Total - (6) balanced mic/lineinputs, (4) unbalanced,mono-summed RCA input pairs, S/PDIF input
  • Type: Euroblock (mic/line), RCA(source)
  • Impedance (Euroblock): > 50 kΩ balanced, > 25 kΩ unbalanced, RF Filtered
  • Impedance (RCA): > 25 kΩ unbalanced, RF Filtered
  • Max. Input Line Level: +20 dBu mic/line, +12 dBu RCA
  • CMRR: > 40 dB, typically > 55 dB @ 1 kHz
  • Mic Pre Gain: 30 to 60 dB
  • Mic Input Noise (E.I.N.): < -118 dBu, 22 Hz to 22 kHz, 150 Ω source impedance
  • Mic Phantom Power: +15V DC
• Analog Outputs: 6 total
  • Type: Electronically balanced, RF filtered Euroblock
  • Impedance: 120 Ω balanced, 60 Ω unbalanced
  • Max. Output Level: +20 dBu
• A/D Performance:
  • Type: dbx Type IV Conversion System
  • Dynamic Range (Line): > 113 dB, A-weighted, > 110 dB unweighted
  • Type IV Dynamic Range: > 119 dB, A-weighted, 22 kHz; BW: >117 dB, unweighted, 22 kHz BW
  • Sample Rate: 48 kHz
• D/A Performance:
  • Dynamic Range: 112 dB A-weighted, 109 dB unweighted, 22 kHz BW
• System Performance:
  • Dynamic Range: > 110 dB A-weighted, > 107 dB unweighted, 22 kHz BW
  • THD+N: 0.003% typical at +4 dBu, 1 kHz, 0 dB gain
  • Frequency Response: 20 Hz to 20 kHz, ±0.5 dB
  • Interchannel Crosstalk: > 80 dB typical
  • Crosstalk input to output: > 80 dB
  • Propagation Delay: 0.8 ms
• Power Requirements:
  • Operating Voltage: 100-240 VAC, 50/60 Hz
  • Power Consumption: 27 W
  • BTU: < 92.13
• Dimensions (H x W x D): 1.75" (1U) x 7.75" x 19"
• Weight: 6.2 lbs