AKG
AKG C414 XLS Condenser Microphone
Talk to a Pro
Chat with our Pros on Whatsapp
We're available from Monday to Saturday (9.30am-6.30pm GST)
AKG C414 XLS Condenser Microphone
MM HO
Al Shoala Building, Near Deira City Center, Port Saeed Area
Techniline Electronics Showroom, Ground Floor, Block E
Dubai DU
United Arab Emirates
MM Market
Al Shoala Building, Near Deira City Center, Port Saeed Area
Techniline Electronics Showroom, Ground Floor, Block E
Dubai DU
United Arab Emirates
MM Warehouse
Al Shoala Building, Near Deira City Center, Port Saeed Area
Techniline Electronics Showroom, Ground Floor, Block E
Dubai DU
United Arab Emirates
Pay as low as Dhs. 1770.25\/mo. without fees with Tabby.
Free & Express Shipping in UAE Available.
From the leading broadcast facilities world-wide to the recording studios and the performance stages that have hosted the top musical artists of all genres for more than 60 years, the AKG C414 Large Diaphragm Condenser Microphone needs little introduction. There are few microphones that are as widely considered a de facto part of any professional engineer's mic locker as this famous microphone. Part of what has maintained the C414 as an industry standard has been its impressive versatility, and AKG has pushed the envelope again with the addition of the C414 XLS to this famous line
Features
- Omni, wide cardioid, cardioid, hyper cardioid, figure eight, and four intermediate pickup patterns
- Lock Mode disables all controls easily for live and installation use
- Incredible Dynamic Range of 152 dB
- Three different bass cut filters and three pre-attenuation levels
- Peak Hold LED detects even the shortest overload peaks
- Includes carrying case, pop filter, windscreen, and spider-type shock mount
- Frequency range: 20 to 20 000 Hz
- Sensitivity: 20 mV/Pa (-34 dBV) +/- 0.5 dB
- Max. SPL: 200/400/800/1600 Pa = 140/146/152/158 dB (0/-6/-12/-18 dB) for 0.5% THD
- Equivalent noise level: 6 dB-A (0 dB pre-attenuation) (IEC 60268-4)
- Signal/noise ratio: 88 dB
- Preattenuation pad: 0 dB, -6 dB, -12 dB, -18 dB, switchable
- Bass cut filter slope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
- Impedance: <=200 ohms
- Recommended load impedance: >= 2,200 ohms
- Powering: approximately 4 mA
- Connector: 3-pin XLR to IEC
- Dimensions: 50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.)
- Net weight: 300g (10.6oz.)
- Requires +48V phantom power
Tech Specs
Microphone Type: | Condenser |
Polar Pattern: | Omni, Wide Cardioid, Cardioid, Hypercardioid, Figure-8 |
Diaphragm Size: | 1" (25.4mm) |
Frequency Response: | 20Hz-20kHz |
Max SPL: | 140dB (158dB w/18dB Pad) |
Output Impedance: | 200 ohms |
Sensitivity: | 23 mV/Pa |
Signal to Noise Ratio: | 88dB (A weighted) |
Self Noise: | 6dB (A weighted) |
Low Cut Filter: | 40Hz, 80Hz (-12dB/octave), 160Hz (-6dB/octave) |
Pads: | -6dB, -12dB, -18dB |
Color: | Dark Grey/Silver |
Connector: | XLR |
Dimensions: | 6.29" x 1.96" |
Weight: | 0.66 lbs. |
Included Accessories: | Stand Mount, Shock Mount, Pop Screen, Windscreen, Carry Case |