Skip to content
Neumann
Neumann KM184 MT Stereo Condenser Microphone Set
Talk to a Pro
Chat with our Pros on Whatsapp
We're available from Monday to Saturday (9.30am-6.30pm GST)
Neumann KM184 MT Stereo Condenser Microphone Set
MM HO
Al Shoala Building, Near Deira City Center, Port Saeed Area
Techniline Electronics Showroom, Ground Floor, Block E
Dubai DU
United Arab Emirates
MM Market
Al Shoala Building, Near Deira City Center, Port Saeed Area
Techniline Electronics Showroom, Ground Floor, Block E
Dubai DU
United Arab Emirates
MM Warehouse
Al Shoala Building, Near Deira City Center, Port Saeed Area
Techniline Electronics Showroom, Ground Floor, Block E
Dubai DU
United Arab Emirates
Pay as low as Dhs. 1274.5\/mo. without fees with Tabby.
Free & Express Shipping in UAE Available.
Experienced users often describe the sound of our small diaphragm microphone as „fresh“ and „vivid”. This is – among other factors – due to a slight treble lift around 9 kilohertz. The KM 184 is an experienced all-rounder, a mic for all seasons. It captures virtually any instrument with amazing complexity and depth of sound. Another advantage: thanks to the extremely tight production tolerances, all KM 184 microphones produce a very consistent sound. Therefore, they can easily be used as a stereo pair with exact spatial imaging for all stereo recording methods.
Features
- Versatile small membrane microphone primarily for instrumental recordings
- Slight treble lift for fresh and vivid sound
- Precise cardioid directionality with excellent rejection of rearward sound
- Uncolored reproduction of neighbouring sound sources
- Tight production tolerances – perfect for stereo recordings
Tech Specs
| Acoustical operating principle: | Pressure gradient transducer |
| Directional Pattern: | Cardioid |
| Frequency: | Range 20 Hz - 20 kHz |
| Sensitivity at 1 kHz into 1 kohm: | 15 mV/Pa ± 1 dB |
| Rated Impedance: | 50 ohms |
| Rated load impedance: | 1 kohms |
| Equivalent noise level, CCIR 1: | 22 dB |
| Equivalent noise level, A-weighted 2: | 13 dB-A |
| Maximum SPL for THD 0.5% 3: | 138 dB |
| Signal-to-noise ratio, CCIR(re. 94 dB SPL) 4: | 72 dB |
| Signal-to-noise ratio, A-weighted (re. 94 dB SPL) 5: | 81 dB |
| Maximum output voltage: | 10 dBu |
| Supply voltage | (P48, IEC 61938): 48 V ± 4 V |
| Current consumption | (P48, IEC 61938): 3.2 mA |
| Matching connector: | XLR 3 F |
| Weight: | approx. 80 g |
| Diameter: | 22 mm |
| Length: | 107 mm |