Skip to content
Klark Teknik
Klark Teknik DN100 V2 Active DI Box with Extended Dynamic Range
Talk to a Pro
Chat with our Pros on Whatsapp
We're available from Monday to Saturday (9.30am-6.30pm GST)
Klark Teknik DN100 V2 Active DI Box with Extended Dynamic Range
MM HO
Al Shoala Building, Near Deira City Center, Port Saeed Area
Techniline Electronics Showroom, Ground Floor, Block E
Dubai DU
United Arab Emirates
MM Warehouse
Al Shoala Building, Near Deira City Center, Port Saeed Area
Techniline Electronics Showroom, Ground Floor, Block E
Dubai DU
United Arab Emirates
Pay as low as Dhs. 80.75\/mo. without fees with Tabby.
Free & Express Shipping in UAE Available.
Please note: Since this is a back order product we cannot guarantee when it will be available, please also note that the price is indicative and subject to change. Please contact us for more information
KEY FEATURES-
Active DI box with high-headroom design and +48 V phantom power for extended dynamic range
-
Fully transformer-isolated design ensures electrical separation between PA and stage equipment
-
Balanced line input on Neutrik* XLR and high impedance input and link output on 1/4" TRS connectors
-
20 dB input pad and earth lift switches
-
Aluminium extrusion casing with protective rubber corners
-
Compact and rugged design
DESCRIPTION
The DN100 has become an established favourite amongst both engineers and musicians alike. With its high headroom, dynamic response and sonic clarity, DN100 faithfully reproduces the character of electric and acoustic instruments and allows far more of the detail of musical performances to be captured. DN100 is intended for professional applications where +48 V phantom power is a standard feature on all mixing consoles, and its innovative design results in a significantly higher clipping point than many other active DI Boxes, providing +10 dBu output into a 2 kΩ load. This increased headroom means that much higher level input signals can be accommodated without the need for an attenuating pad. Combined with a very low noise input circuit topology, DN100 offers a very wide dynamic range, and only requires a single -30 dB pad for use when connecting directly to instrument amplifier outputs.
DN100 is built to handle the rigours of life on the road, a thick aluminium extrusion protects the electronics, and in turn is covered by a tough silicone rubber sleeve.
SPECIFICATIONS
Inputs
| Connectors |
2 x 1/4" TRS and 3-pin XLR linked in parallel |
| Impedance |
1 MΩ nominal, balanced or unbalanced, 20 kΩ (XLR only) |
| Max input level |
35 dBu (with pad enabled) |
| Attenuator |
20 dB pad |
Outputs
| Connector |
3-pin XLR |
| Impedance |
50 Ω |
| Max output level |
15 dBu with 10 kΩ load |
| Min load |
600 Ω |
System
| Noise |
-103 dBu, 22 Hz to 22 kHz unweighted, with input terminated by 10 kΩ resistor |
| Frequency response |
20 Hz to 20 kHz, ±1 dB, 10 kΩ load |
| Distortion (THD + N) |
Typically <0.005% @ 1 kHz, +10 dBu |
Power Requirement
| Voltage |
+48 V phantom |
| Current consumption |
<10 mA |
Physical
|
Dimensions |
118 x 63 x 112 mm (4.7 x 2.5 x 4.4") |
|
Weight |
(4.7 x 2.5 x 4.4") Weight 0 |