Boya
Boya BY-M1000 Large-Diaphragm Multi-Pattern Condenser Studio Microphone
Talk to a Pro
Chat with our Pros on Whatsapp
We're available from Monday to Saturday (9.30am-6.30pm GST)
Boya BY-M1000 Large-Diaphragm Multi-Pattern Condenser Studio Microphone
MM HO
Al Shoala Building, Near Deira City Center, Port Saeed Area
Techniline Electronics Showroom, Ground Floor, Block E
Dubai DU
United Arab Emirates
MM Market
Al Shoala Building, Near Deira City Center, Port Saeed Area
Techniline Electronics Showroom, Ground Floor, Block E
Dubai DU
United Arab Emirates
MM Warehouse
Al Shoala Building, Near Deira City Center, Port Saeed Area
Techniline Electronics Showroom, Ground Floor, Block E
Dubai DU
United Arab Emirates
Pay as low as Dhs. 91.75\/mo. without fees with Tabby.
Free & Express Shipping in UAE Available.
KEY FEATURES
-
Gold-sputtered diaphragm.
-
Broadcast-quality condenser microphone.
-
Ideal for recording podcasts, voiceovers, musical instruments, vocal performances.
-
Cardioid, Omnidirectional and Bidirectional polar patterns.
-
Wide frequency range and ultra-low noise.
-
Off-axis rejection for clean recordings.
-
Controlled by low-cut filter switch.
-
0dB , -10 dB Pad switch.
-
Electrically balanced output.
-
24V or 48V phantom power.
-
All-metal housing.
- Included shock mount & pop filter.
DESCRIPTION
The BOYA BY-M1000 is a large-diaphragm condenser designed for recording in studio applications. Use it for miking vocals or instruments around your studio. It offers three polar patterns: cardioid, omnidirectional, and figure-8. All three polar patterns have their uses in the studio environment.
Omnidirectional gives you an even phase and frequency response all around the capsule. Cardioid deadens the back of the capsule, allowing you to mic sources closer to walls; this is the preferred polar pattern of the project or home studio. Figure-8 deadens both sides of the capsule, while the front and back have the same frequency and phase response; this is a wonderful choose for mono-miking two instruments while minimizing room coloration.
The mic itself boasts a smooth and flat frequency response between 20 Hz and 20 kHz. The two-position low-cut filter can help mitigate some rumble and clean up the signal in situations where low-end frequency is not wanted. The -10 dB pad is a boon when miking loud sources, such as drums. Switches for both are found on the mic itself.
The mic is fashioned out of metal, and runs off 24 to 48V phantom power, supplied from your preamp, console, or interface. A 10' mic cable is included, as is a shockmount, a pop filter, and a 3/8 to 5/8" thread adapter to accommodate all manner of mic stands.
SPECIFICATIONS
Acoustic Principle | Condenser |
Polar Pattern | Cardioid, Omnidirectional, Bidirectional |
Diaphragm |
34mm(1.3") |
Frequency Response | 20Hz – 20kHz |
Signal to Noise Ratio |
80dB and more |
Impedance | 200 Ohm |
Power Requirement | 24V or 48V Phantom |
Cable Length |
3m(10ft) |
Dimensions |
207mm x 115mm x 185mm 8.1” x 4.5” x 7.3” |
Weight | 812g (29 oz) |