Tascam
Tascam ML-16D 16ch Analog Line In/Out Dante Converter
Talk to a Pro
Chat with our Pros on Whatsapp
We're available from Monday to Saturday (9.30am-6.30pm GST)
Tascam ML-16D 16ch Analog Line In/Out Dante Converter
MM Market
Al Shoala Building, Near Deira City Center, Port Saeed Area
Techniline Electronics Showroom, Ground Floor, Block E
Dubai DU
United Arab Emirates
Pay as low as Dhs. 2410.0\/mo. without fees with Tabby.
Free & Express Shipping in UAE Available.
Are you looking for an easy way to integrate your analog audio devices into a Dante network? Look no further than the TASCAM ML-16D 16CH ANALOG LINE IN/OUT DANTE CONVERTER! This Dante-focused converter is designed to insert or extract analog audio into or out of a Dante (Digital Audio Network Through Ethernet) network using external breakout devices that utilize D-Sub format connectors. It has two D-Sub inputs and two D-Sub outputs, that can be used to connect several devices that utilize D-Sub connectors such as microphone preamplifiers, console mixers, audio interfaces, amplifiers, and other audio devices. With up to 24-bit/96 kHz quality, dual redundant Ethernet jacks, LED display for signal level and overload per input/output channel, and reference level dip switches for selectable dBu level metering, the ML-16D is a great choice for all your Dante needs.
FEATURES:
- Dante-focused interface for connection of external audio in or out of a Dante audio network.
- 16-channel analog line input and 16 analog line outputs (48 kHz / 96 kHz) using 4 D-Sub connectors.
- Dual redundant Ethernet jacks which support both primary and secondary connections.
- Up to 24-bit / 96 kHz quality.
- LED display for signal level and overload per input/output channel.
- Reference level dip switches for selectable dBu level metering.
- Firmware updatable via Dante port.
- AES67 and Revenna compatible.
SPECIFICATIONS:
LINE INPUTS | ||
Connector | D-sub 25pin female × 2 | |
Locking screws | No.4-40 UNC (inch type) | |
Nominal input levels | +4dBu, +6dBu (only when maximum input level is +15dBu) |
|
Maximum input levels | +24dBu, +22dBu, +20dBu, +18dBu, +15dBu (set by REF. LEVEL switches) |
|
Input impedance | 10kΩ or higher | |
LINE OUTPUTS | ||
Connector | D-sub 25pin female × 2 | |
Connector | No.4-40 UNC (inch type) | |
Output impedance | 200Ω or lower |
Power | AC 100 - 240V, 50/60Hz | |
Power consumption | 22W | 14W |
Dimensions (W×H×D) | 19.0" × 1.77" × 11.96" / 483 × 45 × 303.8 mm | |
Weight | 7.7 lbs. / 3.5 kg | 7.3 lbs. / 3.3 kg |
Operating temperature range | 32˚F to 104˚F / 0˚C to 40˚C | |
Standard accessories | Power cord, Rackmount screw kit, Owner’s Manual (including warranty) |