Sound Devices
Sound Devices Scorpio Portable Production Mixer
Talk to a Pro
Chat with our Pros on Whatsapp
We're available from Monday to Saturday (9.30am-6.30pm GST)
Sound Devices Scorpio Portable Production Mixer
MM Market
Al Shoala Building, Near Deira City Center, Port Saeed Area
Techniline Electronics Showroom, Ground Floor, Block E
Dubai DU
United Arab Emirates
Pay as low as Dhs. 11093.75\/mo. without fees with Tabby.
Free & Express Shipping in UAE Available.
KEY FEATURES
- Flagship Field Recorder
- 32 I/O over Dante, AES I/O
- Per-Channel EQ, HPF, Limiting & More
- 48V Phantom Power
- XLR, TA5 & TA3 Inputs / 12 Analog Outs
- 12 Busses, Fully Routable Matrix
- Accurate Timecode Generator
- Internal 256GB SSD
- Simultaneous Recording to SD Cards
- Multiple Battery & Powering Options
DESCRIPTION
Scorpio: Sound Devices' flagship 32-channel, 36-track portable mixer-recorder designed for state-of-the-art production sound. You've got a tough job, and Sound Devices gets it. With Scorpio and its built-in Bluetooth wireless, cabling requirements are significantly decreased, decluttering your gear bag, increasing reliability, and vastly improving ease of use. And you can also say goodbye to concerns about battery life, power loss, and file corruption.
Equipped with 16 mic/line preamplifiers, 32 channels of Dante I/O, AES in and out, 12 analog outputs, and multiple headphone outs, Scorpio is ideally suited to any production scenario. A fully customizable routing matrix lets you effortlessly send any input to any channel, output, or bus; and up to 12 buses may be individually mixed. Thanks to its compact form factor, Scorpio is happy whether slung over your shoulder or in a mobile rig. Sound Devices Scorpio ushers in a new era of production sound.
Scorpio benefits from Sound Devices’ latest cutting-edge technology. Its ultra-powerful processing engine, comprised of three FPGA (Field Programmable Gate Array) circuits and six ARM (Advanced RISC Machine) processors, delivers the horsepower you need for even the most complex field recording. FPGA-based audio processing with 64-bit data paths ensures the highest sound quality and reliability. Scorpio also gives you Sound Devices’ latest analog mic/line preamp design, which delivers the best sonics and lowest noise of any preamp in the company’s history. Also onboard are phantom power, analog limiters, highpass filters, 3-band EQ, and delay.
Scorpio's internal SSD and the ability to simultaneously record to two SD cards for redundancy means that lost data due to file corruption is a thing of the past. For flexibility, you can send different files to your choice of media. And the SD-Remote Android companion app lets you control Scorpio via a larger display, so you can always stay on top of it, even on a dark set.
Scorpio features an onboard dual L-Mount battery charger and may be powered with L-Mount batteries or via its TA4 DC inputs using smart batteries, NP-1 batteries, or in-line power supplies. The full-featured, ultra-accurate timecode generator even has its own battery to retain timecode for up to four hours after power off.
SPECIFICATIONS
Number of Tracks | 36 (32 Inputs + Stereo Mix) |
Max Sample Rate/Resolution | 192 kHz / 24-Bit |
Microphone | Built-In Slate Mic |
Number of Mic Preamps | 16 |
Built-In Speaker | No |
Display | 4.2" / 10.7 cm Color LCD |
Memory Card Support | SD |
Internal Storage |
256 GB |
Audio File Formats | BWF, WAV |
Sample Rates | AAC/WAV: 44.1 / 47.952 / 48 / 48.048 / 88.2 / 96 / 192 kHz |
Bit Depth | 16 / 24-Bit |
Bit Rates | 32 to 256 kb/s |
Signal Processing & FX | Compressor, Delay, EQ, Limiter, Low-Cut Filter |
Timecode Support | Yes |
Frame Rates Supported | 23.98 / 24 / 25 / 29.97 / 29.97 DF / 30 / 30 DF |
Clock Accuracy | 0.1 ppm / 0.25 Frame per 24 Hrs |
Analog I/O | 6 x XLR 3-Pin Female Active-Balanced Line/Mic Input 2 x TA3 3-Pin Male Active-Balanced Line/Mic Input (Lockable) 4 x TA5 5-Pin Male Active-Balanced Line/Mic Input (Lockable) 1 x TA5 5-Pin Male Balanced Mic Input (Lockable) 2 x XLR 3-Pin Female Active-Balanced Line/Mic Output 2 x Hirose 10-Pin Female Balanced Line/Mic Output 6 x TA3 3-Pin Male Balanced Line/Mic Output (Lockable) 1 x 1/8" / 3.5 mm TS Female Unbalanced Headphone Output 1 x TA5 5-Pin Male Active-Balanced Headphone Output (Lockable) |
Digital I/O | 2 x XLR 3-Pin AES3 Output 1 x Hirose 10-Pin Output 2 x RJ45 Dante In/Out |
Phantom Power | +12 / 48 V, Selectable On/Off (Applied to All Inputs) |
Phantom Power Current | 10 mA per Channel |
Host Connection | 1 x USB Type-C (USB 3.1 Gen 1) 1 x USB Type-A (Control) |
Bluetooth | Bluetooth (Remote) |
Frequency Response | 10 Hz to 80 kHz |
Gain/Trim Range | Mic Inputs: +12 to +76 dB Line Inputs: -14 to +50 dB Headphone Outputs: Up to 20 dB |
Max Input Level | Mic Inputs: +8 dBu Line Inputs: +28 dBu |
Max Output Level | Line Outputs: +20 dBu Headphone Outputs: +14 dBu |
Headphone Output Power | 400 mW per Channel |
Dynamic Range | A/D Converters: 120 dB |
Impedance | Inputs: 4 Kilohms (Mic Level) 4 Kilohms (Line Level) 1/8" / 3.5 mm Inputs: 8 Kilohms Outputs: 250 Ohms (Mic Level) 120 Ohms (Line Level) 3.2 Kilohms (-10 dBV) 1.8 Kilohms (Unbalanced) |
THD+N | Inputs: 0.005% |
EIN | -129 dBu (A-Weighted) |
Power Options | Battery, AC/DC Power Adapter |
Battery Type | 2 x L Series (Not Included) |
AC/DC Power Adapter | 10 to 18 VDC |
Operating Temperature | -4 to 140°F / -20 to 60°C |
Storage Temperature | -40 to 185°F / -40 to 85°C |
Operating Humidity | 90% (Non-Condensing) |
Dimensions | 12.6 x 2 x 8.1" / 32 x 5.1 x 20.5 cm |
Weight | 5.7 lb / 2.6 kg (without Batteries) |