RCF
RCF NXL 24-A Active Two-Way Column Speaker Array
Talk to a Pro
Chat with our Pros on Whatsapp
We're available from Monday to Saturday (9.30am-6.30pm GST)
RCF NXL 24-A Active Two-Way Column Speaker Array
MM Market
Al Shoala Building, Near Deira City Center, Port Saeed Area
Techniline Electronics Showroom, Ground Floor, Block E
Dubai DU
United Arab Emirates
Pay as low as Dhs. 1695.75\/mo. without fees with Tabby.
Free & Express Shipping in UAE Available.
DESCRIPTION
The NX L24-A Active Two-Way Column Speaker Array from RCF is a 1400W active column speaker array system. It is composed of four 6" woofers, and a 2.5" voice coil compression driver, which is loaded from a waveguide on a 100° x 30° constant directivity horn. It is designed to allow coherent sound dispersion while minimizing lobing in a compact enclosure.
The wide coverage horizontal angle and the controlled vertical dispersion allow for correct sound reproduction serving a wide area and assistance in limiting feedback and reverberated sound. The integrated DSP manages crossover, equalization, soft limiter, compressor and dynamic bass boost protections. Equalizations are available to operate with a single column or in pairs.
The ND 640 compression driver is loaded from a waveguide to a constant directivity 100° x 30° horn. The ND 640's 2.5" voice coil allows a crossover point of 800Hz, which allows a wide vocal range to be produced by this driver. The NXL 24-A is powered by a 1400W peak power digital amplifier, split 400W for the HF and 1000W for the LF. The DSP handles the processing within the cabinet and allows adjustment for a single column application or HF close coupling application.
The NXL 24-A presents a SMPS power supply section in order to produce maximum output and reduce transportation weight. A Mic/Line switch to adjust the input sensitivity is provided. When used just for speech, the Mic setting allows to use a microphone directly with the speaker. Set the selector to Line when using the speaker for live music or playback. A back-panel volume knob allows to set the overall volume of the speaker according to its application. This unit provides Power, Signal, and Status LEDs for monitoring the system.
Using its accessory is possible to fly 2 NXL 24-A units in HF close coupling configuration with a choice of three possible angles (0°, 15°. 20°). It is also possible to pole mount the system and due to a second pole mount on top of the cabinet, it is possible to couple two units. The cabinet is equipped with four rubber protections and two aluminum side handles for rental use and easy transportation. NXL 24-A cabinet is enclosed in Baltic Birch Plywood with internal structural metal bracings
Features
- 1,400 Watt Class D bi-amplification
- 131 dB SPL Max
- 65 Hz - 20 kHz frequency response
- 4 x 6" Woofers
- 2.5" voice coil RCF Precision C. Driver on a waveguide
- 100° x 30° slightly tilted pattern control
- DSP controlled input section with single or dual EQ preset
- East-to-fly and install with built-in rigging points and pole mount socket
Frequency Response | 65 Hz to 20 kHz |
Maximum Sound Pressure Level (SPL) | 131 dB |
Coverage Angle | Horizontal: 120° Vertical: 30° |
Compression Driver | 2" (5.1 cm) 2.5" (6.4 cm) voice coil |
Woofer | 4 x 6.0" (15.2 cm) 1.5" (3.8 cm) voice coil |
Input Sensitivity | -2 dBu / + 4 dBu |
Crossover Frequencies | 800 Hz |
Protection | Themel, RMS |
Limiter | Soft limiter |
Frequencies | High: D / 400 W Peak 200 RMS Low: D / 1000 W Peak 500 RMS |
Connectors | 1 x 3-pin XLR female, audio input 1 x 1/4" phone jack, audio input 1 x 3-pin XLR male, signal output 1 x PowerCON, power input 1 x PowerCON, power output |
Controls | 1 x Volume 1 x Flat/Boost 1 x Input sensitivity switch 1 x Power main switch |
LED Indicators | 1 x Limiter, red 1 x Signal, green 1 x Power status, green |
Power Supply | Switching 1400 W Peak 700 RMS |
Cooling | Convection |
Mounting | Mount, stack, fly |
Dimensions | 41.6 x 7.9 x 10.8" (105.6 x 20.1 x 27.4 cm) |
Weight | 58.8 lb (26.4 kg) |